2-C Epoxy Topcoat
AC 130 is a sealing and varnishing material for cementitious surfaces such as concrete and cement screeds as well as for reactive resin-bound surfaces, primarily for surfaces exposed to mechanical and chemical stress such as grain stores, silo boards, sleeping areas, slatted floors, dirt plinths as well as in warehouses and workshops. When used as a topcoat, AC 130 is particularly suitable for use on AC 110 epoxy primer, AC 160 universal filler or on AC 192 renovation mortar, as the mechanical and chemical resistances are further optimised. Approximately 750 g/m² of the AC 130 epoxy topcoat must be applied for topcoats on gritted surfaces (slip resistance).
- Solvent-free
- Emission-free
- Physiologically harmless
Container sizes:
- 2,25 kg
- 4,5 kg
- 10 kg
Color: ca. RAL 7046
Surfaces:
Concrete
Asphalt- Tiles
- Ferrous metals
- Screed
- Bitumen
- Reactive resin bonded substrate
- Wood
- Other metals
- WaschConcrete
- Laminate/PVC
- Glass
- Drywall
Tools:
Application instructions
When applying reactive polymers, the temperature of the surface is crucial, in addition to the ambient temperature. Chemical reactions generally slow down at low temperatures; this also extends the application, recoatability, walkability and curing times. At the same time, the higher viscosity leads to an increase in consumption. At high temperatures, the chemical reactions are accelerated, meaning that the above-mentioned times are shortened accordingly. For the reactive polymer to cure completely, the average temperature of the surface you are applying it to must be above the minimum temperature. For more detailed application instructions, please refer to the technical data sheet and the sheet on reactive resins / application instructions.
