2-C Epoxy Silo Wall/Dirt Plinth 2-in-1 Primer and Sealer
AC 122 is used as a coating for silo walls as well as for splash zone areas. Primer and sealer in a single application. Floor coatings should be avoided. Absorbent and rough surfaces must be primed with AC 115 Flex (300 g/m²). On standard substrates, priming and its associated step can be omitted. The surface to be coated must always be pretreated with AC 600 Special Cleaner.
- Solvent-free
- Emission-free
- Physiologically harmless
Container size: 10 kg
Colors: ca. RAL 6002, ca. RAL 7046
Surfaces:
Concrete
Asphalt- Tiles
- Ferrous metals
- Screed
- Bitumen
- Reactive resin bonded substrate
- Wood
- Other metals
- exposed concrete
- Laminate/PVC
- Glass
- Drywall
Tools:
Application instructions
When applying reactive polymers, the temperature of the surface is crucial, in addition to the ambient temperature. Chemical reactions generally slow down at low temperatures; this also extends the application, recoatability, walkability and curing times. At the same time, the higher viscosity leads to an increase in consumption. At high temperatures, the chemical reactions are accelerated, meaning that the above-mentioned times are shortened accordingly. For the reactive polymer to cure completely, the average temperature of the surface you are applying it to must be above the minimum temperature. For more detailed application instructions, please refer to the technical data sheet and the sheet on reactive resins / application instructions.
