2-C Epoxy Primer
AC 110 is a general purpose primer for chemically/mechanically stressed surfaces. Optimised for use under AC 130 topcoat and other solvent-free coating systems as well as for application under AC 192 renovation mortar. To ensure a particularly non-slip coating, AC 800 quartz sand (grading curve 0.3 - 0.8 mm or 0.6 - 1.2 mm, approx. 2 kg/m²) can be sprinkled into the wet AC 110 primer. Approximately 500 g/m² of the AC 110 primer must be applied for gritted surfaces (slip resistance). After curing, the coating is finished with AC 130 topcoat. When combined with AC 130R, at least 400 g/m² of AC 110 primer must be applied. Always clean the surface to be primed with AC 600 special cleaner beforehand.
- Solvent-free
- Emission-free
- Physiologically harmless
Container sizes:
- 2,25 kg
- 4,5 kg
- 10 kg
Surfaces:
Concrete
Asphalt- Tiles
- Ferrous metals
- Screed
- Bitumen
- Cement plaster
- Other metals
- Washed concrete
- Sand-lime brick
- Glass
- Drywall
Tools:
Application instructions
When applying reactive polymers, the temperature of the surface is crucial, in addition to the ambient temperature. Chemical reactions generally slow down at low temperatures; this also extends the application, recoatability, walkability and curing times. At the same time, the higher viscosity leads to an increase in consumption. At high temperatures, the chemical reactions are accelerated, meaning that the above-mentioned times are shortened accordingly. For the reactive polymer to cure completely, the average temperature of the surface you are applying it to must be above the minimum temperature. For more detailed application instructions, please refer to the technical data sheet and the sheet on reactive resins / application instructions.
